Search results for 'Martin Guitar 16 Series'
-
Sold
Gibson Les Paul Special Single Cutaway P-90 Pickups
The Gibson Les Paul Special's solid mahogany body is carved with a single cutaway for good upper-fret access, and was given a flat "slab" top for ease of manufacture. The neck on the Les Paul Jr Special cutaway guitar is constructed from solid mahogany carved to Gibson's popular "slim taper" profile, which offers a blend of speed and comfort. The neck shape on the Gibson Les Paul Junior guitar is an outstanding marriage between the rounded '50s profile and super-slim early '60s profile. An ebony fingerboard enhances the Gibson guitar's note attack and articulation Learn More$0.00Out of stock
-
Sold
Martin D-18 Mahogany Spruce Dreadnought 2014 with LR Baggs EAS Electronics
This is an 2014 Martin D-18 Dreadnought featuring sleek, modern High Performance Neck for enhanced playability, gorgeous Sitka Spruce top and select Mahogany back and sides. Learn More$0.00Out of stock
-
Sold
Webber 000 12-Fret Rosewood Spruce With Slotted Peghead
This is a Webber Rosewood Spruce 000 12-Fret with slotted headstock in excellent condition Learn More$0.00Out of stock
-
Sold
Traugott Model R Brazilian / Bearclaw German Spruce 1997 With Highlander Pickup
This is a 1997 Jeff Traugott Model R with Brazilian Rosewood back and sides and gorgeous Bearclaw German Spruce soundboard. The Model R is Jeff's most popular size, slightly larger than a Martin OM but with a narrow waist and round curves which make it a bit more comfortable to play. Learn MoreRegular Price: $19,999.00
Special Price $15,500.00
Out of stock
-
Sold
Taylor Guitars GC8 Rosewood Spruce Grand Concert With Deluxe Case
The Taylor GC8 grand concert guitar has volume that belies its size. The slotted peghead and short-scale neck deliver a more "woody" tone and an unbelievably easy feel on the fretboard. The clarity, balance, sustain, excellent bass response, and wonderful coloration of the India Rosewood back and sides of the GC8 is without equal. When paired with solid Sitka spruce top, it is an unstoppable tonal combination. Other features of the GC8 acoustic include an Ivoroid bound neck and body, Indian rosewood headstock overlay, abalone rosette and fretboard dots, and a traditional slotted peghead. Learn More$0.00Out of stock
-
Sold
Gurian 3H-S3R With K&K Mini Pickup
This is a 1980 Gurian 3H-S3R. Gurian Guitars was a manufacturer of high quality acoustic guitars based in New York City, then Hinsdale, New Hampshire and finally West Swanzey, New Hampshire, from the 1960s to 1981. The guitars were designed by luthier Michael Gurian who also supervised production. The company was one of the earliest "boutique" guitar brands in the United States, offering an alternative product to those of the larger, factory-based makers of the day, with instruments characterized by a distinctive shape, features and sound. The S3R is a mid-sized instrument with plenty of power, brilliance and sustain. This size is quite versatile, an excellent choice for solo or accompaniment. The Size 3 model has become a favorite for recording work thanks to it's balanced tone. The 3H was a higher grade version of the standard S3R featuring 3-piece back, herringbone inlay on the top, back and sides gold plated Schaller tuners. Specs are as follows: Top Wood: Sitka spruce Back and sides: East Indian Rosewood Binding: Maple Rosette: Herrinbone OAL Length: 41" Body length: 19.5" Upper bout: 12" Waist: 10.5" Lower bout: 15.25" Maximum depth: 4" Scale: 25.7" Nut width: 1 19/32" Saddle Spacing: 2.25" Electronics: K&K Mini Condition is excellent with a few handling marks here and there but no issues to mention. Comes with Cedar Creek case shown. Learn More$0.00Out of stock
-
-
Sold
Taylor Guitars 855 12-String Jumbo Vintage 1986 Lemon Grove Model
This amazing guitar was hand built in Taylors tiny Lemon Grove shop back in 1986 by Bob Taylor with help from Larry Breedlove, well before they started using CNC machines for everything. This model was used by artists like Neil Young and Prince who appreciated the ultra-playable neck. Original pre-CNC Taylors are getting harder to find as collectors start to see the value. Grab this one at a very fair price. Learn More -
Sold
Adamas 1597 by Ovation
Pre Owned Adamas 1597 by Ovation 6-String Acoustic Electric Cutaway With Case Learn More$0.00Out of stock
-
Pre-Owned
PRS Angelus Cutaway Custom Cocobolo With Electronics
Featuring select solid Adirondack top, some of the nicest Cocobolo back and sides we have seen, and the matching Cocobolo bridge, fretboard and headstock overlay there is no doubt this guitar is gorgeous, but the voice of this PRS Angelus Cutaway is even more impressive. With excellent volume and sustain and truly amazing balance and note separation this acoustic will not disappoint Learn More$0.00Out of stock
-
Sold
Froggy Bottom Model M
Froggy Bottom Model M was Born of requests for a grand concert version of the popular full-sized K guitar, Froggy Bottom M guitars sing with a balanced voice that has repeatedly been characterized as having great clarity and sparkle. Even when played with great delicacy, the Froggy M speaks clearly and beautifully. Its tight waist and full, rounded lower bout make it a pleasure to have in your lap Learn More$4,799.00Out of stock
-
Sold
Taylor 615 Custom Vintage 1988
This is a Vintage 1988 Taylor 615 Custom jumbo featuring Maple back and sides, Spruce soundboard, Custom Abalone inlays, and black stain finish Learn More$0.00Out of stock
-
Sold
Martin Custom Shop CS-7-28 Rosewood Spruce Mini D-28 with Geiib Case
This is our Custom Shop Martin 7-28 Mini D-28 Dreadnaught based on the long discontinued 7-28. This guitar will make an ideal travel companion for those that do not want to travel with a travel guitar, or anyone who enjoys a smaller guitar but likes the tonal properties of the Martin Dreadnought Learn More$0.00Out of stock
-
Pre-Owned
McAlister Concert (OM) Old Growth Sitka with Premium Brazilian Rosewood back and sides - 2004 Model
This is a 2004 McAlister Concert featuring old growth Sitka Spruce top and Brazilian back and sides.
Learn More
From McAlister Guitars:
"The McAlister Concert model takes its inspiration from the...$0.00Out of stock
-
Sold
Stehr Guitars 00-12 with Ameritage Case
This is a 2009 Stehr 00-12 with all the bells and whistles, full specs are as follows: 00 12-Fret Body Soundboard: Sinker Redwood Back and sides: Macassar Ebony Macassar Binding, Fretboard, Headstock and Bridge: Rosette: Paua Burl Neck material: Mahogany Lower bout: 14 7/8" Upper bout: 10" Waist: 8 1/4" Depth: 4 1/8" Length of body: 19.5" Overall length: 39.25" Scale length: 25 3/8" Nut width: 1 11/16" Saddle spacing: 2 1/8" Electronics: K&K Mini Burle Fret Markers Side Soundport X Brace, Forward Shifted Carpathian Spruce Learn More -
$0.00
Out of stock
-
Sold
Bourgeois JR-A Rosewood Spruce Orchestra Model with Hardshell Case
This is a pre Pantheon JR-A (JOM) featuring AA Rosewood and Spruce with rich black Ebony fretboard and bridge. Learn More$0.00Out of stock
-
Sold
Larrivee LSV-11 - Master Grade Rosewood / Sitka Spruce / Florentine Cutaway / Short Scale / Fishamn Electronics
The LSV-11 features Larrivee's finest wood sets and highest grade appointments. The slightly smaller LS body (somewhere between 00 and 000) and short scale make this the ideal fingerstyle guitar. Just a joy to play Learn More$0.00Out of stock
-
Sold
Breedlove Oregon Concert E Myrtlewood / LR Baggs EAS VTC Pickup
There is a special magic found only in the Northwest, and this magic inspired a series of instruments unlike any other. It began with the Oregon Series, combining the power of Sitka spruce tops, myrtlewood backs and sides and hard rock maple necks. Then we became curious what a guitar would sound like if we used a myrtlewood top. WOW! Not only are the instruments stunning with myrtlewood’s fascinating color, texture and figure, the sound is balanced, rich and profound. The results are five of the best selling, best sounding guitars we handcraft in Bend, Oregon. Factory installed LR Baggs EAS VTC electronics and a Breedlove deluxe hardshell case are included Learn More$0.00Out of stock
-
Sold
Santa Cruz RS Slope Shoulder Jumbo
This is an SCGC RS model which is Richard Hoovers interpretation of a vintage Gibson jumbo. For these slope shoulder jumbos SCGC uses perfectly quarter sawn, narrow, stiff, spruce brace stock, and then they double taper it. The first taper extends out beyond the bridge plate and then the second taper drops to the linings. This heavily knifed bracing style is something unique to Santa Cruz developed exclusively to create the woody, dry, explosive tone that the old Gibsons were prized for. It creates a light low mass brace, while not losing the snap and explosiveness that can be the result of a scalloped bracing design. Learn More$0.00Out of stock
-
Sold
Gibson J-29 Acoustic-Electric Rosewood Spruce Slope Shoulder Dreadnought With Case
Handcrafted exclusively from solid tone-woods, sitka spruce and rosewood. The scalloped 1930s advanced X-bracing pattern provides a rich and deep tone. The J-29 belts out an incredibility wide dynamic range that is balanced across the tonal spectrum Learn More$0.00Out of stock
-
Sold
Breedlove Ed Gerhard Signature Model Early Steve Henderson Era
Designed in conjunction with finger style legend Ed Gerhard, this guitar is constructed with rosewood back and sides and a Sitka Spruce top. The jumbo-size body features a proportionally large lower bout, a narrow waist, and a relatively shallow depth of 3 inches at the neck and 4 1/16" at the heal. Like most Breedlove's, the Gerhard comes equipped with the JLD Bridge System which is mounted under the ebony bridge Learn More$0.00Out of stock
-
Sold
Martin 000-28ECB Eric Clapton Limited Brazilian #90 of 500
This is one of the original 500 Brazilian Rosewood Martin 000-28ECB Eric Clapton Signature models built in 2002. This one is #90 of 500 made, and it features exceptional Brazilian Rosewood back and sides. Full specs are as follows: Martin 000-28ECB Eic Clapton Limited Brazilian Construction: Mahogany Blocks/Dovetail Neck Joint Body Size: 000-14 Fret Top: Solid Sitka Spruce Rosette: Fine Herringbone Top Bracing Pattern: Standard "X" Scalloped Top Braces: Solid Sitka Spruce 5/16" Back Material: Solid Brazilian Rosewood Back Purfling: HD Zig-Zag Side Material: Solid Brazilian Rosewood Endpiece: Grained Ivoroid Endpiece Inlay: Black/White Boltaron Binding: Grained Ivoroid Top Inlay Style: Fine Herringbone Side Inlay: None Back Inlay: Black/White Boltaron Neck Material: Select Hardwood Neck Shape: Modified V Nut Material: Bone Headstock: Solid/Diamond?SquareTaper Headplate: Solid Brazilian Rosewood/Large Old Style Heelcap: Grained Ivoroid Fingerboard Material: Solid Black Ebony Scale Length: 24.9" Number of Frets: 20 Fingerboard Width at Nut: 1-3/4" Fingerboard Width at 12th Fret: 2-1/4" Fingerboard Position Inlays: Diamonds & Squares - Long PatternFingerboard Binding: None Finish Back & Sides: Polished Gloss Finish Top: Polished Gloss w/ Vintage Toner Finish Neck: Polished Gloss Bridge Material: Solid Black Ebony Bridge Style: Belly Bridge String Spacing: 2-1/4" Saddle: 16" Radius/Compensated/Bone Tuning Machines: Gotoh Nickel Open-Geared w/ Butterbean Knobs Recommended Strings: Martin Light Phosphor Bronze (MEC12) Bridge & End Pins: White w/Black Dots Pickguard: Tortoise Color - Beveled & Polished Case: Original Martin Case Interior Label: CFM IV & Eric Clapton Pre-Printed Signatures Learn More$0.00Out of stock
-
Pre-Owned
Martin D-28 Rosewood Spruce Dreadnought Vintage 2013 - s/n 1751748
The D-28 is the Dreadnought by which all others are judged. Constructed of solid East Indian rosewood back and sides, Sitka spruce top and mahogany neck, this instrument has been a favorite of artists from Hank Williams Sr. to Jimmy Page. Massive bass response balanced with articulate highs makes this a benchmark acoustic guitar and a must-have for every guitarist Learn More$0.00Out of stock
-
Sold
OME 12" Minstrel Banjo With Case
The MINSTREL, like the Tupelo, gives a warm and woody Old-Timey sound. With a scrolled peg head and Mother-of-Pearl shell inlay in the Frailing scoop, this model is fashioned after the American Antebellum banjos. The 2-ply solid Maple rim is 9/16” thick and is capped with black Ebonite and bound with simulated Tortoise shell. A varnish finish is hand-rubbed generously and then sealed. The OME 12” maple Tone Rim construction combined with less brackets and wood rim-rod produce our “woodiest” Old-Time banjo tone. The MINSTREL is made with the same care and precision as other OME instruments and comes with a deluxe hard-shell case. Learn More$0.00Out of stock