Search results for 'Martin Guitar 16 Series'

Based on some of our favorite pre-war Martins this full custom Size 2 Parlor features premium Genuine Mahogany and hand cut dovetail neck construction. Full specs are as follows: CONSTRUCTION: Standard; Mahogany Blocks/Dovetail Neck Joint BODY SIZE: Size 2 TOP: Solid Genuine Mahogany (2 piece) TOP GRADE: 3 TOP BRACES: Sitka / Scalloped 1/4'' / Standard PATTERN: Size 2 - X-Brace TOP BINDING: None TOP INLAY: None TOP PEARL: None ADDITIONAL TOP INLAY: None ROSETTE: Single Ring PEARL INLAY: None ADDITIONAL ROS. INLAY: .015'' Black Fiber/.015'' Maple Fiber/.015'' Black Fiber/.015'' Maple Fiber/.015'' Black Fiber PICKGUARD: NONE PEARL INLAY: None BACK: Genuine Mahogany BACK PANELS: 2 PURFLING: None CENTER STRIP/LOC. STAMP: Sitka Standard (C.F. Martin & Co. Nazareth, PA Btwn 1st & 2nd Brace) CAUTION STAMP: None BACK BRACES: Sitka Spruce BACK BINDING: None BACK INLAY: None BACK PEARL: None ADDITIONAL BACK INLAY: None SIDES: Genuine Mahogany SIDE INLAY: None SIDE PEARL: None ADDITIONAL SIDE INLAY: None SIDE STRIPS: None ENDPIECE: None ENDPIECE INLAY: None ENDPIECE PEARL: None BLOCK: Mahogany TAG/PLATE: None REAR: Size 2 Mahogany FRONT: Size 2 Adjustable Mahogany Line 1: C. F. Martin Logo Line 2: Custom Shop Logo Line 3: Serial # Line 4: Line 5: NECK: Genuine Mahogany- 12/4 NECK SHAPE: Mod Low Oval HEADSTOCK: Slotted / Do Not Square Slot Corners / 6 String / No Diamond BACK/HEAD STAMP: None TRUSS ROD: 2-Way Adjustable 335mm HEELCAP: None NUT: Bone ON ANGLE/FLAT: Flat HEADPLATE: Solid East Indian Rosewood HEADPLATE DECAL: Small Old Style HEADPLATE BIND: None HEADPLATE INLAY: None HEADPLATE PEARL: None ADDITIONAL HP INLAY: None TUNING MACHINES: GoldenAge2508-Relic Nickel,SideMnt,3OnPlate,EngrvdIvrdBtn(Drill in MR)-"C" Drill FINGERBOARD: East Indian Rosewood RADIUS: 16'' SCALE LENGTH: 24.84 (24.9) WIDTH AT NUT: 1 3/4'' (1.750) WIDTH AT 12 FRET: 2 1/4'' (2.250) FRET WIRE: German G300,Notched 1 3/4 FRETS CLEAR: 12 TOTAL FRETS: 18 FINGERBOARD BIND: None FINGERBOARD INLAY: None PEARL INLAY: Diamond & Squares - Short Pattern (Select Abalone) (GE) ADDITIONAL FB INLAY: None SIDE DOTS: Yellow ABS SIDE DOT POSITION: One at 3rd, 5th, 7th, 9th, Single at 12th, One at 15th & 17th Frets FINISH TYPE: Satin Finish FINISH BODY: CCraft Cat Modified 15 Sheen Satin/Univ Dark Mahog Stain / Rosewood Filler FINISH TOP: CCraft Cat Modified 15 Sheen Satin/Univ Dark Mahog Stain/Rosewood Filler FINISH NECK: CCraft Cat Modified 15 Sheen Satin/Universal Dark Mahog Stain/Rosewood Filler BRIDGE: East Indian Rosewood STYLE: Straightline w/ Drop-In Saddle PEARL INLAY: None ADDITIONAL BR INLAY: None STRING SPACING: 2 1/4'' (2.250) SADDLE: SL,Compensated,Bone,16R,#5 ELECTRONICS: Optional STRAP BUTTON: None STRINGS: MSP 4100 Light Phosphor Bronze BRIDGE PINS: Black Ebony END PIN: Black Ebony Learn More

Make a musical statement that can’t be ignored with the bold and booming nature of a jumbo guitar. Up to 17 inches at the lower bout, these guitars speak loudly and resonate deeply. Maple is an ideal choice for the back and sides, as it helps bring the loudest voice in the room into beautiful focus, both sonically and visually. Learn More

The 000-42 Modern Deluxe is a new take on Martin Vintage. This guitar is packed with custom features and modern technology that you have to see, feel, and hear for yourself. The vintage appointments include a Sitka spruce VINTAGE TONE SYSTEM® (VTS) top, a dovetail neck joint, and natural protein glue construction, giving it the rich, fully aged Martin tone that has inspired generations. The look is unlike anything in our production line with European flamed maple binding (on the body, fingerboard, and headplate), stylish gold frets, gold open-gear tuners, and an ornate torch logo inlaid in pearl on the headstock. Some ultra-modern features include Liquidmetal® bridge pins with abalone dots and a composite carbon fiber bridgeplate that boosts volume, and a new neck shape that is slightly asymmetrical for maximum hand comfort up and down the fretboard. This guitar is anything but standard. Learn More

The D-45 Modern Deluxe is a new take on Martin Vintage. This guitar is packed with custom features and modern technology that you have to see, feel, and hear for yourself. The vintage appointments include a spruce VINTAGE TONE SYSTEM® (VTS) top, a dovetail neck joint, and natural protein glue construction, giving it the rich, fully aged Martin tone that has inspired generations. The look is unlike anything in our production line with European flamed maple binding (on the body, fingerboard, and headplate), stylish gold frets, gold open-gear tuners, and an ornate torch logo inlaid in pearl on the headstock. Some ultra-modern features include Liquidmetal® bridge pins with abalone dots and a composite carbon fiber bridgeplate that boosts volume, and a new neck shape that is slightly asymmetrical for maximum hand comfort up and down the fretboard. This guitar is anything but standard. Learn More

You never have to worry about comfortably reaching the higher frets when you’re using one of our AC models. Nearly all of our AC guitars come with a pickup. Learn More

If you’ve had your eye on a Martin 15 Series guitar, the D-15E is going to knock your socks off. This 14-fret Dreadnought is crafted with sapele back and sides and a mahogany top with non-scalloped bracing, so you’re going to hear bright, airy trebles and a punchy midrange. The Dreadnought body provides plenty of volume so this baby can handle whatever music scenario you can dream up. To top it off, this model comes equipped with Martin E1 electronics and a softshell case to make it super easy to take with you on all your adventures. Learn More

The iconic shape of the Dreadnought is synonymous with acoustic guitars in general. Big and bold, these cannons are perfect for ensemble settings where the guitar competes for sonic space with other instruments or accompanying strong singers. The Dreadnought is the classic flat-picking bluegrass instrument. Neck Material:Mahogany Fingerboard:Ebony Fingerboard Radius:12" Neck Profile:Traditional Even "C" Nut:Bone 1 3/4" Fretwire:20 Jescar-FW43080 Scale Length:25.4" Body Dimensions:16" x 4 23/32" Bracings:Hand-Carved Scalloped X Body Top:Solid Sitka Spruce Body Back/Sides:Solid Ovangkol Bridge/Saddle:Ebony/Bone, 2 5/32" Spacing Rosette:Classic Truss Rod:Dual Acting Binding:Top and Back Binding Material:Herringbone Logo:Pearl Headstock Inlay:Pearl Dots Side Dots:White Bridge Pins:White Plastic w/ Black Dots Body Top Finish:Truetone Gloss Neck Finish:Truetone Gloss Hardware Color:Nickel Pickguard:Tortoise Shell Tuners:Open-Gear Pingwell V93N 3+3 Electronics:Fishman Presys VT Strings:D'Addario XS Coated Phosphor Bronze Light (.012 - .053) Action Height:12th fret 3/32" on the bass side and 2/32" on the treble side Case:Deluxe padded Eastman gig bag Learn More

PCH-M104-NAT Natural Neck Material: Maple Fingerboard: Rosewood Fingerboard Radius: 12" Nut: 30mm Fretwire: 23 Jescar FW43080 Scale Length: 13 7/8" Body Style: A-Style w/ Oval Hole Flat Back Body Dimensions: 13 1/8" x Body Top: Solid Spruce Body Back/Sides: Laminated Mahogany Truss Rod: Single Acting Binding: Top Binding Material: Ivoroid Logo: Maple Headstock Inlay: Pearl Dots Rosette: Single Black Ring Side Dot Color: White Body Finish: Truetone Satin Neck/Headstock Finish: Truetone Satin Hardware Color: Nickel Tailpiece: Eastman Cast Aluminum Tailpiece Bridge: Adjustable Compensated Ebony Bridge String Spacing: 1 5/8" Nut Height: 1-3/16" Tuners: Quality Geared Tuners Strings: D'Addario XT Phosphor Bronze 1140 Action Height: 0.060"/0.050" Case: Padded Gig Bag Color Options: Classic, Natural, Goldburst Learn More

Eastman's Double Top Series feature an innovative take on the classic flat top design. With a unique modification to their top tonewoods, these guitars are more resonant, responsive, and feature better note clarity and balance. The Double Top models feature a pair of one-millimetre-thin spruce slices that are adjoined by Nomex. The latter is a honeycomb-like resinous substance – patented by DuPont – that was originally designed for use in the aerospace industry. It functions as a rigid wall between the two spruce pieces, adding on layers of density and depth. Yet, the added density does not compromise the guitars’ lightness and sonic range. They are designed to respond to all types of vibrations and can handle a variety of styles, ranging from intricate solo picking to larger band setups. The DT30GACE is a Grand Auditorium with cutaway and LR Baggs Anthem Electronics. Learn More

This is a full-size 16” thinline with Antique Varnish finish, Deluxe Maple Laminate Top, Deluxe Maple Laminate back and sides with plenty of tone and attitude! Dual Lollar P-90 Dogears. Learn More

This carbon masterpiece packs the best of McPherson engineering into a road-worthy all-star. It’s a rugged performer that stands up to the most demanding musician’s needs. Learn More